PROTOTYPE SMART BATHROOM BASED ARDUINO UNO

Abstract

Smart Bathroom Based Prototype Arduino Uno is a specially designed tool for automatic bathroom simulation. This tool will work when someone is detected by the sensor on each. When someone comes in the bathroom will automatically turn on. Then in the closet, the toilet will do an automatic flushing. Next bath in the shower, bathroom users close enough in front of the shower, then the air will flow automatically. Then the last activity, namely brushing and washing face in the sink, bathroom users close enough on the sink taps, then the air will flow automatically. Tub and exit, then the automatic light will die. The method used in building prototype arduino uno intelligent bathroom is using design method consisting of several stages, namely: (1) needs, (2) needs analysis, (3) design of hardware and software, (4) manufacture tools, (5) Testing Tools and (6) Operation Tools. The hardware consists of (1) arduino uno microcontroller as the main controller, (2) ultrasonic sensor HC-SR04 as detection of hand spacing at sink and body spacing detector in shower, (2) LDR sensor as detector of incoming object in toilet seat 3 ) DC solenoid valve as an airflow open system, (4) Relay as driver of DC solenoid valve, (5), LED lamp as bathroom light, (6) Limit switch as LED switch light. Based on the results of tests that have been implemented, it can be concluded that the prototype smart bathroom based arduino uno this can work well in accordance with its function. The performance of this tool is observed by looking at the conditions of ultrasonic sensors HC-SR04 and LDR sensors on the sink, shower and toilet seat. The solenoid valve will open the valve coil if the sensor at each. There is an average percentage error of 0.31%
Keywords : Prototype, Ultrasonic sensors HC-SR04, LDR sensors, Arduino Uno, Solenoid valve